19.11.26

Date added: 19.11.26

PVC windows for houses of series 104: what to consider

Introduction

Series 104 houses have their own structural specifics — typical small openings, thin exterior panels and limited mounting depth. Choosing the right PVC windows improves thermal comfort, reduces heating bills and cuts street noise. This guide covers profiles, insulating glass units, installation details and maintenance tips.

Features of series 104 houses

  • Standard rectangular openings often smaller than modern dimensions.
  • Thin exterior panels require careful consideration of frame placement and insulation.
  • Existing windowsills and slopes are frequently retained and can be renovated.

Implications for window selection

  • Limited mounting depth requires well-planned anchors and installation foam.
  • Choose a profile with sufficient rigidity (4–6 chambers) and good thermal performance.
  • The IGU (insulating glass unit) is the main factor for heat saving and sound reduction.

Choosing profile and IGU

  • Profile: 5–6 chamber profiles are a common choice for Baltic climates — balance of cost and thermal efficiency. For higher sound insulation, 6-chamber profiles are preferable.
  • Frame depth: typically 70–90 mm is optimal given wall thicknesses.
  • IGU: a two-chamber low-emissivity IGU with argon filling is a good default. For safety on lower floors choose toughened outer glass.
  • Acoustic performance: mix different glass thicknesses (for example 4-16-6) and consider gas fill for improved insulation.

Installation and fixing

  • Pre-install inspection: check the condition of slopes, sill and opening geometry.
  • Fixing: use metal plates or chemical anchors when the base is weak. Distribute fixing points evenly along the perimeter.
  • Sealing: a three-layer joint — external waterproofing, middle thermal foam, internal vapor barrier — reduces heat loss and moisture ingress.
  • Removing old frames: remove carefully to avoid damaging load-bearing parts.

Ventilation and condensation

  • Modern airtight windows reduce natural ventilation. Plan for trickle vents or supply ventilation to maintain indoor air quality.
  • Micro-ventilation in the sash helps to control condensation without significant heat loss.

Design, slopes and sill

  • Sill replacement: choose PVC or wooden sills as required. A wider sill is convenient for plants.
  • Slopes: thermally insulated slopes (sandwich panels or insulated plaster) prevent cold bridges.
  • Appearance: white or silk-white profiles are common; wood-effect finishes are also available to match interiors.

Budget and timeline

  • Typical production and installation time: 2–4 weeks depending on opening complexity and custom sizes.
  • Budget ranges from basic (5-chamber profile + two-chamber IGU) to premium (6-chamber, triple-glazed IGU, enhanced fittings). Consider extras: security hardware, integrated blinds, insect screens.

Maintenance and warranty

  • Lubricate moving parts regularly and clear drainage holes.
  • Clean profiles with mild detergents and avoid abrasives.
  • Choose a supplier with local service and clear warranty terms.

Frequently Asked Questions (FAQ)

1. Can standard windows be fitted without alteration?

Sometimes yes, but often slopes and seating depth need adjustment. Professional measurement is recommended.

2. What IGU is best for ground-floor apartments?

Use toughened outer glass and consider security fittings to enhance resistance to break-ins.

3. Is a permit required to replace windows?

Usually not for internal replacements, but modifying the façade or balcony glazing may require approval from building management.

4. How to avoid condensation on windows?

Ensure supply ventilation (valves, vents) and use profiles with correct internal sealing; micro-ventilation is helpful.

5. How long do PVC windows last in series 104 houses?

With proper care 25–35 years; fittings and seals may need earlier replacement.

6. Which extras are most useful?

Insect screens, integrated blinds, trickle vents and anti-burglary fittings are commonly recommended.

DK-Logi blog topics and categories

Useful articles about PVC windows, blinds, and practical advice for your home.

PVC windows

Everything about choosing, installing and maintaining PVC windows.

Blinds and accessories

Tips for choosing blinds, curtains and window accessories.

Tips and answers

Answers to popular questions and practical advice.

GET A FREE WINDOW COST ESTIMATE!

Leave a request, and we will contact you to arrange a free measurement and provide a full cost estimate.

Your name
Your phone number *
Your e-mail
File
Choose file
Comment (e.g., window sizes, quantity, preferred profiles)

2025 © All rights reserved