19.11.26

Date added: 19.11.26

Which windows to choose for series 104

Which windows to choose for series 104

Apartment blocks of series 104 are common in the Baltic region and former Soviet countries. The right window choice affects thermal comfort, noise reduction and long-term durability. This guide helps you choose PVC windows for series 104: profile, glazing, installation and useful accessories.

Features of openings in series 104 buildings

  • Openings are usually rectangular with relatively shallow reveals.
  • Replacing windows often requires adapting the new frame to panel reinforcement and ensuring correct sealing.
  • Balcony assemblies often include a door + window combination — consider thresholds, drainage and ventilation.

Profile: how many chambers and why

  • For Baltic climate a 5- or 6-chamber profile with about 70 mm installation depth is a balanced choice, providing good thermal and acoustic performance.
  • 3-chamber profiles are lower cost but offer worse energy efficiency; consider them only for very tight budgets.
  • Internal steel reinforcement in the profile is important for larger sashes and balcony doors.

Glazing: double or triple glazing units?

  • For a typical 104-series apartment a high-quality double-glazed unit with Low-E coating and argon fill is an efficient and cost-effective solution.
  • If you face high street noise or need extra thermal protection, choose a triple-glazed unit with larger air gaps (12–16 mm) and warm-edge spacers.
  • Glass combinations (e.g., 4-16-4 or 4-12-4-12-4) help balance sound insulation and heat retention.

Hardware and ventilation

  • Tilt-and-turn hardware is recommended for flexibility and safe micro-ventilation.
  • A ventilation valve or micro-ventilation mode is important when increasing airtightness in older buildings.
  • Restrictors and child-safety fittings add safety and protect hinges from overload.

Installation and sealing

  • Proper installation is critical in panel buildings: the mounting gap should be foam-filled and protected from outside moisture with vapor-permeable tape and external sealing.
  • Typical embedding depth is 60–80 mm depending on the reveal and insulation.
  • Seal the exterior joint with elastic tape or a professional sealing system to prevent drafts and water ingress.

Sills, flashings and finishing

  • Choose a sill width to suit interior use (plants, appliances). Ensure balcony thresholds have proper waterproofing.
  • External flashings must be sloped and well fixed to divert water away from the facade.

Optional upgrades

  • Insect screens, integrated blinds, anti-burglary hardware and acoustic laminated glass are popular upgrades.

How to choose a supplier

  • Request profile samples and glazing certificates. Compare warranties and installation terms.
  • Inspect previous installations (photos) and ask for a detailed contract specifying installation method (insulation of reveals, protection of external joint).
  • Measure on site — exact dimensions vary between blocks — and clarify lead time and site preparation requirements.

FAQ — Common questions when replacing windows in series 104

What are the typical window sizes in series 104?

Sizes vary by block and apartment layout; common setups include single-sash kitchen windows and two-sash living room windows combined with balcony doors. Always measure openings on site.

Do I need permission to replace windows?

Interior window replacement usually doesn’t affect the facade and typically doesn’t require permits. Alterations that change external appearance or structural elements may need approval — check local regulations.

How long does installation take?

Standard window replacement usually takes 3–6 hours per opening if the site is prepared. Full scope with finishing can take several days.

How to save without losing quality?

Opt for a good 5-chamber profile and a quality double-glazed unit — this often gives the best price-to-performance ratio.

What about warranties?

Ask separately about profile, hardware and installation warranties. Regular maintenance of seals and hardware extends service life.


Description: Practical guide to choosing PVC windows for series 104 buildings — profiles, glazing units, installation tips and FAQs.

DK-Logi blog topics and categories

Useful articles about PVC windows, blinds, and practical advice for your home.

PVC windows

Everything about choosing, installing and maintaining PVC windows.

Blinds and accessories

Tips for choosing blinds, curtains and window accessories.

Tips and answers

Answers to popular questions and practical advice.

GET A FREE WINDOW COST ESTIMATE!

Leave a request, and we will contact you to arrange a free measurement and provide a full cost estimate.

Your name
Your phone number *
Your e-mail
File
Choose file
Comment (e.g., window sizes, quantity, preferred profiles)

2025 © All rights reserved