17.11.26

Date added: 17.11.26

Why do windows in series 467 fog up in winter

Why do windows in series 467 fog up in winter

Summary

  • Condensation appears when warm, humid indoor air meets a cold surface.
  • Many series 467 apartments have weak ventilation and cold window reveals.
  • Fogging can occur on the room-side glass or between panes (seal failure).
  • Quick fixes: airing, dehumidifiers, avoid indoor clothes drying.
  • Mid-term: adjust hardware, replace seals, add trickle vents.
  • Long-term: energy-efficient insulated glazing and improved reveal insulation.

What is condensation and why does it happen

Condensation is moisture that forms when humid air contacts a cooler surface and the temperature drops below the dew point. In winter, indoor air is warm and humid while the glass surface can be much colder — this creates visible fog or water droplets on windows.

Sources of high indoor humidity include drying laundry indoors, cooking without extraction, and frequent showers. Even high-quality windows will fog if ventilation and moisture control are inadequate.

Why series 467 apartments are prone to fogging

Typical building features in many series 467 blocks contribute to the problem:

  • limited or inefficient ventilation ducts in kitchens and bathrooms;
  • cold window reveals and thin exterior walls that create thermal bridges;
  • sometimes windows were replaced without considering ventilation or proper installation;
  • older or low-performance glazing with low insulation value.

If the window sits in a cold niche or the reveal is uninsulated, the inner surface of the glass cools more and fogging starts earlier.

Identifying the type of fogging

  • Fogging on the interior glass surface: usually caused by high indoor humidity and insufficient air exchange.
  • Fogging between panes: indicates a broken seal or failed spacer in the insulated glazing unit — this requires repair or replacement by a professional.

Quick practical steps

  • Ventilate frequently: short cross-ventilation (5–10 minutes) several times per day.
  • Reduce indoor humidity sources: avoid drying clothes indoors; use kitchen and bathroom fans.
  • Use a household dehumidifier if humidity is persistently high.
  • Wipe and keep window sills and seals clean to allow moisture to evaporate more quickly.

Mid-term and long-term measures

  • Replace or repair worn seals and weatherstripping to improve airtightness.
  • Adjust window hardware so sashes close tightly and evenly.
  • Install trickle vents or controlled mechanical ventilation for a steady fresh-air supply.
  • Upgrade to energy-efficient insulated glazing (double or triple glazing with warm-edge spacer). This raises the interior glass temperature and reduces condensation.
  • Insulate window reveals and the joint between window frame and wall to remove thermal bridges.

Mold control and safety

If condensation is accompanied by black spots or musty smells, treat affected areas immediately with an appropriate fungicide and address the moisture source. Mold poses health risks, especially to children and allergy sufferers.

When to call a specialist

If you notice fogging between panes, a professional assessment is needed — the sealed unit is no longer airtight and typically must be replaced. For persistent interior fogging despite lifestyle changes, request a site inspection to evaluate ventilation and window installation.


FAQs

  • Q: Is wiping the windows enough?

    • A: Wiping removes symptoms but not the cause. Without reducing humidity or improving ventilation, fogging will return.
  • Q: Do DK-Logi windows fog more than others?

    • A: Not necessarily. Even high-quality windows can fog under poor ventilation. Proper installation and the right glass package reduce the risk.
  • Q: Can adding a radiator under the window solve the problem?

    • A: Heating the air near the window can help but it doesn't replace proper ventilation or fix thermal bridges. Better to combine heating with insulation and ventilation upgrades.
  • Q: What does fogging between panes mean?

    • A: It usually means the insulated glass unit lost its seal and moisture entered the cavity. Replacement or professional repair is required.
  • Q: Which glazing is best for winter?

    • A: Low-emissivity (Low-E) double or triple glazing with warm-edge spacers improves inner-glass temperature and reduces condensation.
  • Q: How to get an accurate estimate for replacement?

    • A: Request a site visit from DK-Logi for measurement and a quote — costs depend on sizes and chosen glass type.

If you need help diagnosing the cause in your apartment, DK-Logi technicians can inspect the window, measure humidity, and recommend targeted fixes from seal replacement to installing ventilation solutions.

DK-Logi blog topics and categories

Useful articles about PVC windows, blinds, and practical advice for your home.

PVC windows

Everything about choosing, installing and maintaining PVC windows.

Blinds and accessories

Tips for choosing blinds, curtains and window accessories.

Tips and answers

Answers to popular questions and practical advice.

GET A FREE WINDOW COST ESTIMATE!

Leave a request, and we will contact you to arrange a free measurement and provide a full cost estimate.

Your name
Your phone number *
Your e-mail
File
Choose file
Comment (e.g., window sizes, quantity, preferred profiles)

2025 © All rights reserved